Griffin

This article is about the BattleMech design. For derivative designs and other uses, see Griffin (disambiguation).

Griffin
Production information
Manufacturer	Brigadier Corporation Defiance Industries (1S, 6S) Earthwerks Incorporated (1N) Kallon Industries (1N, 6S) Vandenberg Mechanized Industries Victory Industries (1DS, 6S)
Production Year	2492
Model	GRF-1N
Class	Medium
Cost	4,957,107 C-bills
Technical specifications
'Mech type	Inner Sphere BattleMech
Mass	55 tons
Chassis	Earthwerks GRF
Armor	Starshield A
Engine	CoreTek 275
Communications System	Neil 6000
Targeting Tracking System	Octagon Tartrac, System C
Heat Sinks	12 single
Speed	86 km/h
Jump Jets	Rawlings 55
Armament	1x PPC 1x LRM-10
BV (1.0)	1,021
BV (2.0)	1,272

Description

Built in 2492, the Griffin was originally classified as a heavy BattleMech, filling in the weight gap between mammoth machines like the Mackie and smaller recon 'Mechs like the Wasp, and intended for close assaults. Combining tremendous speed and firepower in one frame, the Griffin briefly dominated in this role before being superseded by larger and better-equipped 'Mechs. However the Griffin was very popular among commanders and pilots alike and so Earthwerks Incorporated kept it in production, this time reclassified as a medium 'Mech and tasked with long-range fire support for medium lances. In this capacity the Griffin has excelled, combining good striking power, endurance, and speed, with its only major weakness being a lack of close-range defensive weapons.

During the Succession Wars the Griffin could be found in almost every unit of all the Great Houses and mercenary forces, thanks in part to its diverse number of manufacturers. Besides being constructed from Earthwerks' factory on Keystone the Griffin was later acquired and built by Defiance Industries (Hesperus II), Kallon Industries (Talon), Brigadier Corporation (Oliver), and Norse BattleMech Works (later Victory Industries, Marduk). It was even manufactured in the Periphery by Vandenberg Mechanized Industries on Illiushin. Only the Capellan Confederation lacked a means of building the 'Mech, although they made up for it by purchasing a limited number from the Taurian Concordat. During the Fourth Succession War some of these manufacturers exchanged hands, with the Draconis Combine capturing Marduk from the Federated Suns and the Lyran Commonwealth taking Oliver from the Free Worlds League. This exchange also happened to coincide with several new variants being designed to exploit recently recovered lostech. As such variants meant specifically for either Houses Kurita, Marik or the Federated Commonwealth found their way into the arsenals of all of them. During the Clan Invasion these manufacturers produced the new variants to meet the Clan threat while Vandenberg Industries continued to build original GRF-1N Griffins.

When Vicore Industries began shopping around its "Project Phoenix" initiative, Defiance and Kallon Industries signed on to begin producing the completely redesigned GRF-6S Griffin. Victory Industries later signed up as well after the legal battle between Wolf's Dragoons and the Lyran Alliance saw the famous mercenary group selling its light fusion engine technology to both the Draconis Combine and Free Worlds League. The League designed a native update to the Griffin while ComStar had their own built as well which, ominously, soon began appearing in the ranks of the Word of Blake Militia. The Griffin would continue to remain a staple of the battlefields of the Inner Sphere during the maelstrom of the Jihad, the era of the Republic of the Sphere and the rise of the ilClan, with models still in production within the Free Worlds League and the Wolf Empire.

Weapons and Equipment

The primary weapon on the Griffin is a Fusigon PPC in the right arm, backed up by a Delta Dart LRM-10 launcher mounted in a drum over the right shoulder. The PPC allows Griffin to work in a long-range fire support role, while the LRM launcher also gives the Griffin some indirect fire support capabilities. The Achilles' heel of the design is its lack of short-range weapons, for when an enemy is capable of closing ranges and engaging in close quarters combat, and the fact that all of its weapons are located on the right side. The 'Mech is however equipped with two powerful battlefists for hand-to-hand combat.

The massive and efficient Core Tek 275 fusion engine of the Griffin gives it a cruising speed of 57.1 km/h, and combined with five jump jets occupying the rear torso areas for a total jumping distance of 150 meters, is what distinguishes it from other medium 'Mechs and has kept the Griffin in the game over the centuries. Unfortunately, like most other early 'Mechs, the Griffin suffers from insufficient heat capacity, with only 12 single heat sinks installed. The result is that Griffin pilots, lacking the ability to do both, must choose at the outset of a fight whether to engage or withdraw.

Nine and a half tons of standard armor plating compares quite favorably to many other medium 'Mechs, although as is often the case the Griffin will find itself in combat with larger 'Mechs. For this reason, two pairs of false armor baffles were added to the 'Mech, one on its shoulders providing limited protection to the LRM launcher and cockpit, and a smaller pair on the legs protecting the knees joints.

Variants

• GRF-1A 

  The original Griffin produced by Maxwell Manufacturing, Inc. weighed 60 tons, thus technically falling into the heavy category of BattleMechs, and used primitive components. It could reach a top speed of 64 km/h and cover 90 meters with prototype jump jets. It also carried a prototype PPC and a single LRM-5 with one ton of ammunition. It was protected by 14.5 tons of primitive armor and equipped with 11 single heat sinks. A primitive cockpit was provided for the pilot. BV (2.0) = 1,024

• GRF-1DS 

  The 1DS variant of the Griffin, built by Defiance Industries, Kallon Industries, and Norse BattleMech Works from their respective production lines starting in 3049, was intended to become the new standard model for the Federated Commonwealth. The engine was upgraded to a Hermes 275 XL extralight engine, 14 double heat sinks improved cooling, and the weapons were stripped from the chassis. The 'Mech now carried a Doombud LRM-20 launcher over the right shoulder and a Thunderbolt-12 large pulse laser in the right arm. It also employed CASE to protect the two tons of missile reloads stored in the left torso, which wouldn't stop the 'Mech from being disabled should an ammo explosion occur, but would improve recovery prospects. The capture of Norse BattleMech Works on Marduk by the Draconis Combine meant this variant was also employed by the Draconis Combine Mustered Soldiery. BV (1.0) = 1,202; BV (2.0) = 1,285

• GRF-1RG 

  A Succession War era skirmisher, the 1RG drops the PPC and LRM rack for a large and medium laser in its right arm, supported by a medium and small laser and machine gun in each side torso, each with its own ton of ammo. This loadout is made possible by the removal of the signature jump jets. BV (2.0) = 1,167

• GRF-1S 

  The 1S Griffin was, for many years, the only production variant of the Griffin, built for House Steiner by Defiance Industries on Hesperus II starting in 2857. It attempted to rectify the 1N's lack of close range weapons by removing the PPC and in its place mounting a Defiance B3L large laser and two Defiance B3M medium lasers. The LRM-10 was also replaced with a Coventry Five-Tube LRM-5 and one ton of reloads in the right torso. To further help manage the heat load, the 'Mech also added four additional single heat sinks to the design. This new arrangement essentially transformed the long-range support 'Mech into a medium-range brawler. BV (1.0) = 1,061; BV (2.0) = 1,253

• GRF-2N 

  The SLDF's Royal Griffin was introduced in 2751 and mounted an ER PPC, two SRM-6 launchers, and a Guardian ECM suite. The heat sinks were upgraded to double-strength models and the ammo was protected by CASE. To fit all this, the armor was changed to ferro-fibrous and the chassis was made of endo steel. This design would end up disappearing during the Succession Wars until the Jihad era, thanks to the discovery of the New Dallas Memory Core, and the Clans also retained a number of original models among their solahma forces. BV (2.0) = 1606

• GRF-3M 

  The 3M Griffin was an upgraded version of the design built for House Marik by Earthwerks and Brigadier Corps starting in 3049. With production lines on Keystone and Oliver this variant sought to enhance the original's long-range capabilities. The engine was exchanged for a Hermes 275 XL extralight engine and carried 14 double heat sinks to improve heat management. The normal PPC was replaced by a Fusigon Longtooth ER PPC for longer reach at the expense of more heat, and the LRM-10 launcher had been upgraded to a Doombud LRM-20 launcher for more indirect fire support capabilities. Finally, a ChisComp 32 small laser was mounted in the left torso, and the two tons of LRM ammo was protected by CASE. While intended for the Free Worlds League Military, the capture of Oliver by FedCom forces meant the 3M also appeared in large numbers in the Armed Forces of the Federated Commonwealth. BV (1.0) = 1,440; BV (2.0) = 1,521

• GRF-3N 

  The 3N Griffin is a 3150-era model produced at the Earthwerks Tiber plant for the Free Worlds League, engaging its foes at range with a Fusigon Longtooth ER PPC and a Artemis IV-enhanced Delta Dart II enhanced LRM-10 launcher with two tons of reloads. Clad in 10 tons of Valiant Chainmail ferro-fibrous armor and built around an endo steel frame, the use of a standard 275-rated fusion engine, 11 double heat sinks, jump jets, and CASE II provide the 3N impressive survivability. BV (2.0) = 1,560

• GRF-3RG 

  A Clan Invasion era version of the GRF-1RG, the 3RG retains the right-arm medium laser and torso machine guns but swaps the remaining lasers for their pulse laser equivalents. This swap is made possible in part by dropping one ton of machine gun ammo and removing three heat sinks though a swap to double strength models compensates somewhat for the reduction. BV (2.0) = 1,213

• GRF-4N 

  This Griffin was introduced to the Taurian Concordat in 3083. It carries a plasma rifle and three ER medium lasers. It also has a higher top speed than its inspiration and can jump farther thanks to an additional jump jet. BV (2.0) = 1,591

• GRF-4R 

  This Word of Blake design emerged in 3076 during the Jihad. It uses improved jump jets to cover 270 meters at a time, and a larger Edasich Motors 330 XL extralight engine brings the top speed to 97 km/h. This Griffin carries a snub-nose PPC, an MML-5 launcher, and an ER medium laser. Endo steel forms the chassis, and 11 double heat sinks keep the 'Mech cool. BV (2.0) = 1,412

• GRF-5K 

  This variant of the 6S introduced in 3071 sported enough improved jump jets for it to vault up to 240 meters in a single bound. It also used a Defiance 275 Light light fusion engine, though it was built on a standard frame. It was protected by 10 tons of Starshield A light ferro-fibrous armor and also incorporated a heavy-duty gyro that can take more punishment than a standard gyro. It was armed with a Lord's Light 4 light PPC, a reliable Shigunga LRM-10 along with one ton of CASE-protected ammunition, and a Diverse Optics ER medium laser for short-range situations. To protect the pilot it carries a Full-Head Ejection System. BV (2.0) = 1,390

• GRF-5L 

  This variant, introduced in 3070, uses an XL engine to max out armor protection with 11.5 tons of stealth armor. As with all stealth armor-equipped designs, the 5L used a Guardian ECM suite to power it. It was armed with a plasma rifle and an MML-5, which could threaten enemies at all ranges, and three medium lasers provided added short-range firepower. 14 double heat sinks kept the 'Mech relatively cool, even when the stealth armor was active. BV (2.0) = 1,781

• GRF-5M 

  The 5M variant of the Griffin was designed in 3066 with a distinctive flair for the Free Worlds League. Unlike other "Phoenix" 'Mechs, it was powered by an extralight engine and carried, as its primary weapon, a light Gauss rifle. This was backed up by an LRM-10 launcher and a small laser for close range work. This variant also utilized double heat sinks and carried 10.5 tons of armor. BV (1.0) = 1,108; BV (2.0) = 1,224

• GRF-6CS 

  A variant of the 6S developed in 3067 for the Com Guards, only to also fall into hands of the Word of Blake, the 6CS used an endo steel frame and was powered by an extralight engine. The 'Mech's primary weapons were an ER PPC and an LRM-15 launcher linked to an Artemis IV fire control system. The 6CS also carries two ER medium lasers for short range engagements, and has an advanced electronics warfare suite, consisting of a Guardian ECM suite and a C3i computer to allow it to share targeting telemetry with friendly units. BV (1.0) = 1,469; BV (2.0) = 1,695

• GRF-6R 

  An advanced if ammo-dependent sniper, the 6R mounts a Rotary AC/2 in its right arm supported by a Thunderbolt 10 in the right torso. Carrying two tons of RAC rounds and three of Thunderbolt missiles, a left-torso ER small laser and Guardian ECM suite round out this XL-engine powered 'Mech. BV (2.0) = 1,515

• GRF-6S 

  The Lyran 6S Griffin was built in 3066 using an Earthwerks GRF Endo Steel chassis and mounted a Defiance 275 Light Fusion Engine for power. This allowed the 6S model to carry a Defiance 1001 ER PPC in the right arm, a Coventry StarFire LRM-15 over the right shoulder with Artemis IV, and two RAMTech 1500Z ER medium lasers, one in the center torso and one in the left arm. It carried 12 tons of the original Starshield A armor plating using layered sections at steeper angles, which allowed it to withstand more attacks than the 6CS, but only 10 double heat sinks. Two tons of LRM reloads were mounted in the right torso and protected by CASE. Although still carrying the five Rawlings 55 jump jets and Neil 6000 communications system of the original model, the targeting-tracking system was updated to an RCA Instatrac Mark X and, perhaps most importantly, the cockpit was renovated for additional comfort and to incorporate a Full-Head Ejection System. BV (1.0) = 1,461; BV (2.0) = 1,781 or 1,461

• GRF-6S2 

  This variant of the Griffin was based on the 6S. By dropping one of the ER medium lasers, the Artemis IV system, and using a Clan-spec LRM-15, engineers found enough room to add a C3 boosted slave and a targeting computer. CASE II protects the LRM ammunition. BV (2.0) = 1,870

• Griffin C 

  A Wolf Empire refit of aging 3M and 1DS models at the Earthwerks Keystone plant and appearing across the Inner Sphere thanks to Clan Sea Fox, the so-called Griffin C is as fast as many light 'Mechs, mounting an Inner Sphere grade VOX 330 XL extralight engine and endo steel skeleton, 11 double heat sinks and nine improved jump jets. Offensively its weaponry is all Clan grade, with the Griffin C carrying a Type 22 ER PPC in its right arm and a right torso–mounted Type X-S Streak LRM-10 launcher fed from a one ton CASE protected ammo bay. BV (2.0) = 2,131

Custom Variants

• GRF-1DS Grensax 

  The personal 'Mech of Free Rasalhague Republic MechWarrior Helga Almstedt. To cater to the aggressive warrior's preference for brutal melee combat, the 1DS's normal LRM-20 is downgraded to a lighter LRM-15 rack along with removing a ton of reloads to free up the weight to mount a custom hatchet in the left arm.

• GRF-1E Sparky 

  The personal ’Mech of Elle Bennett of the Fifth Donegal Guards, prior to the War of 3039 she had replaced the LRM-10 launcher of her Griffin with five medium lasers, one mounted in each torso, one beside the PPC and two in Sparky's left arm. The additional weight saved goes towards an extra single heat sink and an additional ton of armor. BV (2.0) = 1,449

• GRF-1E2 Sparky 2.0 

  The personal ’Mech of Leftenant Natasha Ergen of the Fifth FedCom RCT, her stock Griffin had been refitted with ferro-fibrous armor and a light fusion engine. 14 double heat sinks and a targeting computer allowed Ergen to obtain maximum effect from an all-energy weapons array consisting of an ER PPC, two medium lasers mounted one per side torso alongside three ER medium lasers, one mounted in each torso component. BV (2.0) = 1,862

• GRF-6S Francine 

  A vintage Griffin refitted to the 6S standard and beyond with captured Word of Blake technology, when Francine rescued the Black Widow Company at the Royal Pass of the Ridges in 3070, her 'Mech carried half a ton less armor and swapped the 6S's ER PPC for an advanced snub-nose PPC as well as adding an extra ER medium laser to the left arm and a rear-facing small laser. BV (2.0) = 1,820

• GRF-6S Francine II 

  After becoming part of Stacy Church's new Black Widow Command Lance, Francine's Griffin was upgraded with experimental technologies. Dropping the Artemis IV and the rear facing small laser for a supercharger to increase its speed, her 'Mech's armor was replaced with laser reflective plating, making it extremely resistant to the Word of Blake's new laser technology. BV (2.0) = 2,223

Apocryphal Variants

Apocryphal Content Starts

The information after this notice comes from apocryphal sources; the canonicity of such information is uncertain.
Please view the reference page for information regarding their canonicity.

From MechWarrior 5: Call to Arms Expansion Pack:

• GRF-1P 

  Introduced in 3024, this variant of the Griffin replaces the right arm–mounted PPC with twin medium lasers to free up the weight to upgrade the LRM-10 launcher in the right torso to a LRM-15 and fit a medium claw in the left arm.

From MechWarrior Online:

• GRF-AR Ares 

  PGI's Hero 'Mech version of Peter Armstrong's Ares retains the major features of the classic GRF-1N model, the only difference being the removal of the center torso mounted jump jet to free up the weight to mount a small laser in the left arm.

Apocryphal Content Ends

Design Quirks

The Griffin is subject to the following Design Quirks:

• Battlefists
• Jettison-Capable Weapon (PPC)
• Rugged (1)
• Ubiquitous

The GRF-1S Griffin variant is subject to the following Design Quirks:

• Battlefists
• Jettison-Capable Weapon (Large Laser)
• Protected Actuators

The GRF-1A Griffin variant is subject to the following Design Quirks:

• Improved Cooling Jacket (Prototype PPC)
• Jettison-Capable Weapon (Prototype PPC)
• Obsolete (2595)
• Poor Sealing

Notable Pilots

See Category:Notable Griffin Pilots

Related BattleMechs

• GRF-2N Super Griffin - Although it carries the designation GRF-2N, this is actually a new 60-ton 'Mech design based on the regular Griffin, in a similar fashion to IIC evolution of existing designs, albeit not with Clan-level technology.

• Griffin IIC - The Griffin was one of the 'Mechs taken on the Exodus by the SLDF, following the collapse of the Star League. Eventually, the model was redesigned to use exclusive Clan technology and the Griffin IIC was created. BV (1.0) = 1,492; BV (2.0) = 1,608

Notes

• A longtime favorite with House Steiner, two Griffins of the Royal Guards traditionally stand next to the Archon's throne on Tharkad.

• The original Griffin variants and artwork from 3025 were part of the Unseen 'Mech designs. The Griffin was Reseen in 3067 with new variants using revised artwork.

• In German products, the unit's proper name was translated to Greif. The model code was left unchanged.

• In French products, the unit's proper name was translated as Griffon.

• Plastic GFN-1N model is included in BattleTech Beginner Box & BattleTech Beginner Box, Second Edition

Gallery

• 

  Original Unseen GRF-1N Griffin from TRO:3025

• 

  GRF-1N Griffin from Second Succession War

• 

  Unseen GRF-3M Griffin from TRO:3050

• 

  GRF-4R Griffin from TRO:3085

• 

  GRF-5M Griffin from TRO:Phoenix

• 

  GRF-6CS Griffin from TRO:Phoenix

• 

  GRF-6S Griffin from TRO:Phoenix

• 

  Experimental GRF-1A Griffin from XTRO:Primitives IV

• 

  Griffin in colors of Arcturan Guards from Camo Specs

• 

  Unseen Griffin in motion from Tukayyid

• 

  A 43rd Shadow Division Griffin 6S

• 

  A Griffin from MWDA LI dossiers

• 

  Model of Griffin from MWO

• 

  Griffin miniature from BattleTech Beginner Box

Bibliography

• BattleMech Manual
• Blood of Heroes (novel)
• Combat Manual: Kurita
• Experimental Technical Readout: Primitives, Volume 4
• Jihad Turning Points: New Avalon
• MWDA House Liao's dossier of C. Schiller
• MWDA Republic of the Sphere's dossier of Avriel Sterling
• MWDA Steel Wolves' dossier of Chin Wolf
• MWDA Swordsworn's dossier of Chuck Stepp
• Recognition Guide: ilClan, vol. 1
• Record Sheets: 3025/3026
• Record Sheets: 3039 Unabridged
• Record Sheets: 3050
• Record Sheets: 3067
• Record Sheets: 3085 Unabridged — Project Phoenix
• Record Sheets: 3145 New Tech, New Upgrades
• Record Sheets: Operation Klondike
• Record Sheets: Phoenix Upgrades
• Second Succession War
• Starterbook: Wolf and Blake
• Technical Readout: 3025
• Technical Readout: 3039
• Technical Readout: 3050
• Technical Readout: 3055
• Technical Readout: 3085
• Technical Readout: Project Phoenix
• Total Warfare Style Record Sheets: Phoenix Upgrades