Editing Shadow Hawk

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.

Latest revision		Your text
Line 51:		Line 51:
	==Weapons and Equipment==		==Weapons and Equipment==
−	The ''Shadow Hawk'' carries a varied, but effective, mix of weapons. Primary among them is the [[Armstrong J11|80mm Armstrong J11]] [[AC/5]] mounted in the left torso along with one ton of ammo. This weapon, as well as the [[LRM-5#Holly|Holly]] [[LRM-5]] launcher with one ton of reloads in the right torso, provide the ''Shadow Hawk'' with good long-range striking capabilities. When the ''Shadow Hawk'' closes to shorter ranges it can bring to bear its [[SRM-2#Holly_2|Holly]] [[SRM-2]] launcher mounted in the head and its right-arm [[Martell (ML)|Martell]] [[medium laser]] which can generally finish off most 'Mechs of its own weight class or smaller that might have survived the mixed autocannon and LRM fire. One ton of ammunition for the SRM-2 is kept in the ''Shadow Hawk''<nowiki>'</nowiki>s center torso while 12 [[single heat sinks]] provide decent cooling. For hand-to-hand combat the ''Shadow Hawk'' features a pair of Lang manipulative hands, regarded as among the strongest models ever built prior to the fall of the Star League. The ability to grasp and carry objects greatly assists in its ability to take part in raiding missions.<ref name=TRO3025/><ref name=TRO3039/>	+	The ''Shadow Hawk'' carries a varied, but effective, mix of weapons. Primary among them is the [[Armstrong J11|80mm Armstrong J11]] [[AC/5]] mounted in the left torso along with one ton of ammo. This weapon, as well as the [[LRM-5#Holly|Holly]] [[LRM-5]] launcher with one ton of reloads in the right torso, provide the ''Shadow Hawk'' with good long-range striking capabilities. When the ''Shadow Hawk'' closes to shorter ranges it can bring to bear its [[Holly (SRM2)|Holly]] [[SRM-2]] launcher mounted in the head and its right-arm [[Martell (ML)|Martell]] [[medium laser]] which can generally finish off most 'Mechs of its own weight class or smaller that might have survived the mixed autocannon and LRM fire. One ton of ammunition for the SRM-2 is kept in the ''Shadow Hawk''<nowiki>'</nowiki>s center torso while 12 [[single heat sinks]] provide decent cooling. For hand-to-hand combat the ''Shadow Hawk'' features a pair of Lang manipulative hands, regarded as among the strongest models ever built prior to the fall of the Star League. The ability to grasp and carry objects greatly assists in its ability to take part in raiding missions.<ref name=TRO3025/><ref name=TRO3039/>
	While nine and a half tons of armor provide excellent protection, early models of the ''Shadow Hawk'' suffered from defective armor pressure plates, especially in the legs. When struck, these plates were liable to sever the [[myomer]] bundles which governed movement, rendering the 'Mech immobile. Although the mass recall of 2550 largely solved this issue, a small number of ''Shadow Hawks'' were not fixed and continued to see service in battle; on occasion this defect led to the loss of entire battles.<ref name=TRO3025/><ref name=TRO3039/>		While nine and a half tons of armor provide excellent protection, early models of the ''Shadow Hawk'' suffered from defective armor pressure plates, especially in the legs. When struck, these plates were liable to sever the [[myomer]] bundles which governed movement, rendering the 'Mech immobile. Although the mass recall of 2550 largely solved this issue, a small number of ''Shadow Hawks'' were not fixed and continued to see service in battle; on occasion this defect led to the loss of entire battles.<ref name=TRO3025/><ref name=TRO3039/>

Anti-spam check. Do not fill this in!

{{Update Needed|[[Shrapnel_(magazine)#Issue_14|Shrapnel #14]]}} {{InfoBoxBattleMech |image = Shadow_Hawk_SHD-2H_FSW.jpg |name = ''Shadow Hawk'' |manufacturer = [[Earthwerks Incorporated]]<ref name=TRSWp104f>''Technical Readout: Succession Wars'', pp. 104–105: "SHD-2H Shadow Hawk". Previously featured in ''Technical Readout: 3026'', pp. 66–67: "SHD-2H Shadow Hawk" and ''Technical Readout: 3039'', p. 289: "SHD-2H Shadow Hawk"</ref> ---- [[King Dumount Defense Facility]]<ref>''Objectives: Periphery'', p. 31: "King Dumount Defense Facility"</ref> ---- [[Lang Industries]] ---- [[Majesty Metals and Manufacturing]]<ref name=TRSWp104f /> ---- [[Odin Manufacturing]]<ref name=TRJp122f>''Technical Readout: Jihad'', pp. 122–123: "SHD-12C Shadow Hawk". Previously featured in ''Technical Readout: 3085'', pp. 242–243: "SHD-12C Shadow Hawk"</ref> ---- [[Pride of Granada Industries]]<ref>''Objectives: Periphery'', p. 32: "Pride of Granada Industries"</ref> ---- [[Vandenberg Mechanized Industries]] |model = SHD-2H<ref name=TRSWp104f /> |class = Medium |cost = 4,539,382 [[C-bill]]s |production year = 2550 |year reference = <ref>''[http://www.masterunitlist.info/Unit/Details/2901/ MUL online date for the ''{{PAGENAME}}'']''</ref> |Tech Base = Inner Sphere |mech type = BattleMech |mass = 55 |feet = biped |chassis = [[Earthwerks SHD]] <!-- <ref name=TRSWp104f /> --> |armor = [[Maximillian 43]] <!-- <ref name=TRSWp104f /> --> |engine = [[CoreTek 275]] <!-- <ref name=TRSWp104f /> --> |comsys = [[O/P 300 COMSET]] <!-- <ref name=TRSWp104f /> --> |T&T = [[O/P 2000A]] <!-- <ref name=TRSWp104f /> --> |heat sinks = 12 [[Heat Sink|single]] <!-- <ref name=TRSWp104f /> --> |speed = 86 <!-- <ref name=TRSWp104f /> --> |jumpjets = [[Pitban LFT-50]] <!-- <ref name=TRSWp104f /> --> |armament = <!-- <ref name=TRSWp104f /> --> * 1x [[AC/5]] * 1x [[LRM-5]] * 1x [[SRM-2]] * 1x [[medium laser]] |BV (1.0) = 918 |BV (2.0) = 1,064<ref name=TRSWp104f /><ref>''Technical Readout: 3039'', p. 289</ref><ref>''Record Sheets: 3039 Unabridged'', p. 461</ref> }} ==Description== A multirole [[BattleMech]] developed in [[Introduction Year::2550]] during the [[Star League Era|Golden Age]], the '''''Shadow Hawk''''' is a powerful fusion of maneuverability and firepower. With a mix of long-range and short-range weapons, good maneuverability thanks to [[jump jets]], and excellent endurance, the ''Shadow Hawk'' has long been regarded as one of the best 'Mechs in its weight class. The ''Shadow Hawk'' is equally adept whether commanding a reconnaissance [[company]] or serving as a spotter for heavy and assault [[lance]]s.<ref name=TRO3025>''Technical Readout: 3025'', pp. 66–67</ref><ref name=TRO3039>''Technical Readout: 3039'', p. 289</ref> [[Lang Industries]] had technically introduced the ''Shadow Hawk'' many years prior to 2550, but this version of the 'Mech suffered from a debilitating fault in its armor plating. The line was recalled and a major overhaul was accomplished in 2550 without any difficulties which solved the issue for most, but not all, ''Shadow Hawk'' models; this resumption of production therefore is regarded by many historians as the true debut of the design.<ref name=TRO3025/><ref name=TRO3039/> For the next few centuries Lang continued to produce the ''Shadow Hawk'' for the [[Star League]] and the [[Great Houses]] until their factory was destroyed with the start of the [[Succession Wars (History)|Succession Wars]].<ref name=TRO3025/> Afterwards, [[Earthwerks Incorporated]] remained the only manufacturer within the [[Inner Sphere]] to continue producing ''Shadow Hawks'' from their factory on [[Calloway VI]], while in the [[Periphery]] [[Majesty Metals and Manufacturing]] on [[Dunianshire]] built these 'Mechs for the [[Magistracy of Canopus]] and other prospective buyers.<ref name=TRO3039/><ref name=TRO3050>''Technical Readout: 3050'', pp. 136–137</ref> As many of the secrets of [[lostech]] were rediscovered, Earthwerks was able to create an updated variant of the ''Shadow Hawk'', the SHD-5M, in time for the [[Clan Invasion]].<ref name=TRO3050/> Starting in the summer of [[3066]], [[Vicore Industries]] began promoting their "Project Phoenix" to various weapons manufacturers across the Inner Sphere, promising improved versions of venerable designs like the ''Shadow Hawk''. Earthwerks, [[Kallon Industries]], and [[ComStar]] all expressed interest in redesigning the ''Shadow Hawk'', however the latter two lacked appropriate facilities to build the 'Mech and so, at the suggestion of the Vicore group, contracted [[Odin Manufacturing]] on [[Orestes]] to build the components while Kallon finished the process at its factories on [[Nanking]] and [[Talon (moon)|Talon]].<ref name=TROPP>''Technical Readout: Project Phoenix'', 18</ref> The [[Capellan Confederation]] later acquired the rights to build Earthwerks' SHD-7M ''Shadow Hawk'' variant shortly before the [[Jihad]], which they then sublicensed to [[Vandenberg Mechanized Industries]] to produce.<ref name=TROPP/><ref>''Handbook: Major Periphery States'', p. 118</ref> ==Weapons and Equipment== The ''Shadow Hawk'' carries a varied, but effective, mix of weapons. Primary among them is the [[Armstrong J11|80mm Armstrong J11]] [[AC/5]] mounted in the left torso along with one ton of ammo. This weapon, as well as the [[LRM-5#Holly|Holly]] [[LRM-5]] launcher with one ton of reloads in the right torso, provide the ''Shadow Hawk'' with good long-range striking capabilities. When the ''Shadow Hawk'' closes to shorter ranges it can bring to bear its [[Holly (SRM2)|Holly]] [[SRM-2]] launcher mounted in the head and its right-arm [[Martell (ML)|Martell]] [[medium laser]] which can generally finish off most 'Mechs of its own weight class or smaller that might have survived the mixed autocannon and LRM fire. One ton of ammunition for the SRM-2 is kept in the ''Shadow Hawk''<nowiki>'</nowiki>s center torso while 12 [[single heat sinks]] provide decent cooling. For hand-to-hand combat the ''Shadow Hawk'' features a pair of Lang manipulative hands, regarded as among the strongest models ever built prior to the fall of the Star League. The ability to grasp and carry objects greatly assists in its ability to take part in raiding missions.<ref name=TRO3025/><ref name=TRO3039/> While nine and a half tons of armor provide excellent protection, early models of the ''Shadow Hawk'' suffered from defective armor pressure plates, especially in the legs. When struck, these plates were liable to sever the [[myomer]] bundles which governed movement, rendering the 'Mech immobile. Although the mass recall of 2550 largely solved this issue, a small number of ''Shadow Hawks'' were not fixed and continued to see service in battle; on occasion this defect led to the loss of entire battles.<ref name=TRO3025/><ref name=TRO3039/> Three [[jump jet]]s split between the center, left, and right rear torsos gives the ''Shadow Hawk'' an adequate jumping distance of 90 meters; while limited in the distance traveled, it gives the 'Mech an edge when engaged in close combat and supplements its cruising speed of 54 km/h. Perhaps the most valued component on the ''Shadow Hawk'', as far as its [[MechWarrior (pilot)|pilots]] are concerned, is the [[Sparrow 300J life support system]], which among the most advanced ever devised. The Sparrow can keep a pilot comfortable up to 30% longer than similar systems in other 'Mechs, and is especially important on extended missions where a more relaxed pilot is a better pilot.<ref name=TRO3025/><ref name=TRO3039/> ==Variants== *; SHD-1R : First introduced in [[2467]], this first generation of the ''Shadow Hawk'' employs [[Primitive Technology|early BattleMech technology]] in its weaponry, equipment and, armor. This design was first produced by Lang Industries on [[Caph]], where it was designed by [[Rodger Taylor]] as part of the Hegemony's efforts to keep ahead of the Inner Sphere's newly stolen BattleMech technology. The SHD-1R was equipped with a single shoulder mounted [[AC/5]] and a single [[medium laser]]. The 'Mech's primitive fusion engine allowed it to reach a maximum of 64.8 km/h and power its three [[jump jet]]s. The 'Mech was protected by 14 tons of [[primitive armor]] and had 10 [[single heat sink]]s. BV (2.0) = 841<ref>''Experimental Technical Readout: Primitives, Volume 1'', pp. 5, 19: SHD-1R Shadow Hawk - Profile on primitive Shadow Hawk and specs</ref> *; SHD-2D : Another First Succession War variant born of the [[Armed Forces of the Federated Suns]]' desperation prior to the [[Kentares Massacre]], the field refit 2D dramatically increases the close range capabilities of the ''Shadow Hawk'' at great cost to its armor. Introduced in [[2796]], the 2D reduces the armor protection by five tons and adds a second [[SRM-2]] launcher to the center torso, doubles the number of SRM missiles split between left and right torsos, and an additional [[medium laser]] in the left arm. While carrying superior firepower, the loss in armor left the 'Mech far too vulnerable for open combat and those units which use it typically held the 'Mech in ambush to unleash a devastating first volley before retreating.<ref name=TRSWp104f /><ref name=FSW-160/><ref name=TRO3039/> BV (1.0) = 765; BV (2.0) = 899<ref>''Record Sheets: 3039 Unabridged'', p. 460</ref> *; SHD-2D2 : The 2D2 is an upgrade of the -2D ''Shadow Hawk'' introduced in [[3049]], born of the [[Federated Commonwealth]] buying original-model 2Hs from Majesty Metals and refitting them for use by militia forces or for sale to mercenaries. Like the 2D this upgrade adds another SRM launcher to the center torso and a [[medium laser]] to the left arm, however both center torso and head launchers are [[Streak_SRM-2#Federated_SuperStreak|Federated SuperStreak]] [[Streak SRM-2]]s. Besides carrying slightly more armor, a total of six and a half tons, and one ton of Streak ammo in the right torso, it is otherwise identical to the 2D ''Shadow Hawk''.<ref name=TRO3050/> BV (1.0) = 896; BV (2.0) = 1,049<ref>''Record Sheets: 3085 Unabridged — Project Phoenix'', p. 75</ref><ref>''Recognition Guide: ilClan, vol. 12'', p. 24</ref> *; SHD-2Hb : The [[SLDF Royal]] upgrade of the ''Shadow Hawk'' changes the role of the 'Mech to a close-range brawler. Introduced in [[2752]], the weapon systems are replaced with an [[LB 10-X AC]], two [[Streak SRM-2]]s, and two [[medium laser]]s. The heat sinks are [[double heat sink|double-strength models]] and the ammo is protected by [[CASE]]. To save weight it uses an [[endo steel]] chassis and [[ferro-fibrous]] armor. BV (2.0) = 1,354<ref>''Record Sheets: Operation Klondike, p. 40</ref><ref>''Recognition Guide: ilClan, vol. 12'', p. 25</ref><ref name=HOKp159>''Historical: Operation Klondike'', p. 159</ref> *; SHD-2Ht : A refit of the SHD-2H developed by [[ComStar]] for the [[Battle of Tukayyid (3052)|Battle of Tukayyid]], the SHD-2Ht was primarily intended as an [[Elemental]] hunter. While almost being visually identical to the venerable 2H, the 2Ht retains only the arm-mounted [[Martell Model 5]] [[medium laser]], trading the shoulder mounted [[AC/5]] for a [[Krupp Model 32]] [[large laser]] and both missile racks for five [[Blankenburg SLS]] [[Streak SRM-2]] launchers in the right torso fed by a single ton of [[CASE]] protected ammo. The weapon swap was made possible by dropping to 10 [[double heat sink|double-strength heat sinks]]. Most SHD-2Ht's were gathered together in anti-infantry teams alongside [[Jenner#Variants|JR7-F ''Jenner''s]] attached to each [[Level IV|Army]], the 'Mech proving highly successful against Clans forces who misidentified it as the normal SHD-2H and closed to short-range, eventually leading them to mistakenly assume all [[Com Guards|Com Guard]] ''Shadow Hawk''s on [[Tukayyid]] were the SHD-2Ht.<ref name=BoTp162>''BattleTech: Battle of Tukayyid'', p. 162: "Shadow Hawk SHD-2Ht"</ref> BV (2.0) = 1,453<ref name="MUL_SHD_2Ht">''[http://www.masterunitlist.info/Unit/Details/7737/shadow-hawk-shd-2ht Shadow Hawk SHD-2Ht entry on the MUL]</ref> *; SHD-2K : Originally a [[First Succession War]] field refit developed by the [[Draconis Combine]] in [[2803]] as the enraged [[Federated Suns]] pushed the Kurita troops back, the 2K ''Shadow Hawk'' dramatically overhauls the chassis by replacing all original armaments, save the [[LRM-5]], with a [[Donal]] [[PPC]] in place of the [[AC/5]] and five extra [[single heat sink]]s. Though initially introduced to compensate for a lack of autocannon parts and ammunition, the improvement in long range firepower ensured refits continued, with the 2K becoming one of the deadliest units of the Succession Wars<ref name=FSW-160>''First Succession War'', p. 160: "Rules Annex - Technical Readout: - SHD-2D/2K ''Shadow Hawk''"</ref> despite many Lyran opponents' opinion of it as a "''[[Griffin]]'' knockoff."<ref name=TRSWp104f /><ref name=TRO3039/><ref name=RS99>''Total Warfare Style Record Sheets: Phoenix Upgrades'', p. 99</ref> BV (1.0) = 1,018; BV (2.0) = 1,147<ref name=RS99 /><ref>''Record Sheets: 3039 Unabridged'', p. 462</ref> *; SHD-3K : Based on the 2K, this [[3075]] variant carries a [[heavy PPC]], [[MML-5]], and [[ER medium laser]]. [[CASE]] protects the missile ammunition, while [[heavy ferro-fibrous]] armor covers the 'Mech. Additionally, a [[C3 slave]] unit is installed to provide targeting data to friendly units. The heat sinks are upgraded to double-strength models.<ref name=TRJp122f /> BV (2.0) = 1,591<ref>''Record Sheets: 3085 Unabridged — Project Phoenix'', p. 76</ref> *; SHD-4H : Nimikatchi and Majesty Metals worked together to create this [[Dark Age]] variant.<ref>''Recognition Guide: ilClan, vol. 12'', p. 6</ref> 12 [[double heat sink]]s dissipate the heat generated by the [[heavy PPC]] and [[light PPC]] carried by the 'Mech. BV (2.0) = 1,569<ref>''Recognition Guide: ilClan, vol. 12'', p. 26</ref> *; SHD-5D : The 5D ''Shadow Hawk'' is a Davion upgrade to the original, part of Kallon Industries' participation in the "Project Phoenix" initiative started by Vicore Industries. Imagined as a cavalry unit, the 5D removes the [[LRM-5]] launcher and utilizes a [[Mydron Tornado]] [[RAC/5]] in place of the original while also carrying two [[Intek Hellborer]] [[medium laser]]s, one in each arm, and a [[Harpoon-4S]] [[Streak SRM-4]] mounted in the head. Two tons of autocannon ammo and one ton of Streak reloads are carried in the left torso, protected by [[CASE]], while the nine and a half tons of armor are updated to [[Kallon Unity Weave]] [[ferro-fibrous]]. This model is fitted with a [[Full-Head Ejection System]] and its jumping distance is also increased to 150 meters with five [[Rawlings 55]] [[jump jet]]s split between the rear torso areas. Both communications and targeting systems have been updated to [[Neil 6000]] and [[Garret D2j]] systems respectively. The use of a [[Kallon Type VII]] [[endo steel]] chassis frees enough weight to make these update possible.<ref name=TROPP/> BV (1.0) = 1,629; BV (2.0) = 1,684<ref>''Record Sheets: 3085 Unabridged — Project Phoenix'', p. 77</ref> *; SHD-5M : The 5M ''Shadow Hawk'' is the first complete overhaul and upgrade of the design, unveiled in [[3048]] by Earthwerks for the [[Free Worlds League]]. The chassis has been upgraded to an [[Earthwerks SHD II]] [[endo steel]] frame, an additional ton of armor was added, two additional [[jump jet]]s were fitted for a total jumping distance of 150 meters, the engine replaced with an [[XL engine|extralight version]] of the [[Hermes 275 XL|Hermes 275]], and the weapons load has undergone an almost complete renovation. The original [[AC/5]] has been updated to an [[Imperator]] [[UAC/5]], the LRM launcher to a [[LRM-20#Doombud|Doombud]] [[LRM-20]], and the head-mounted SRM launcher to a [[Streak_SRM-2#Hovertec|Hovertec]] [[Streak SRM-2]]. The amount of ammunition carried and the left-arm [[medium laser]] are maintained, and while the number of heat sinks was reduced to 10, these were upgraded to [[double heat sink|double-strength models]].<ref name=TRO3050/> BV (1.0) = 1,349; BV (2.0) = 1,430<ref>''Record Sheets: 3085 Unabridged — Project Phoenix'', p. 78</ref><ref>''Recognition Guide: ilClan, vol. 12'', p. 27</ref> *; SHD-5R : This variant is fitted with a smaller 220-rated [[XL engine]], reducing the top speed to 64.8 km/h, but retains the three [[jump jet]]s that provide a 90 meter jump capability. The right arm has an [[ER medium laser]], the head carries a [[Streak SRM-2]], and a [[light AC/5]] is mounted in the left torso. The main firepower, however, comes from five [[Thunderbolt 5]] missile launchers. The autocannon and Streak launcher each have one ton of ammunition, and the Thunderbolt launchers have four tons of ammunition. This version also has 10 [[double heat sink]]s. BV (2.0) = 1,296<ref>''Recognition Guide: ilClan, vol. 12'', p. 28</ref> *; SHD-5S : Originally from ''[[BattleTechnology]]'' magazine, this heavy scout variant carries a [[large laser]] in the right arm, a pair of [[medium laser]]s in each side torso, and a [[medium pulse laser]] with a coaxially mounted [[Target Acquisition Gear|TAG]] system in the left arm. The left and right torso carry a [[Guardian ECM suite]] and a [[Beagle active probe]], respectively, and a half ton of cargo space is provided in the head, probably for supplies on long reconnaissance missions. The most interesting change, however, is the use of a more powerful 330-rated [[XL engine]] that gives a top speed of 97.2 km/h which, when combined with five [[jump jet]]s allowing 150 meter leaps, allows the 'Mech to get out of tight spots. BV (2.0) = 1,590<ref>''Recognition Guide: ilClan, vol. 12'', p. 29</ref> *; SHD-6D : This AFFS version carries a [[large re-engineered laser]] and a [[medium re-engineered laser]] to defeat the advanced armors fielded by the [[DCMS]]. Missile support comes from a single [[MML-5]] with two tons of ammunition in a [[CASE II]] protected bay. The final weapon is an [[Improved One-Shot]] [[Streak SRM-2]]. 11 [[double heat sink]]s are fitted on the [[endo steel]] chassis. Ground speed and jump capability matches the SHD-5M. BV (2.0) = 1,296<ref>''Recognition Guide: ilClan, vol. 12'', p. 30</ref> *; SHD-7CS : The 7CS is an electronics heavy, high tech upgrade of the ''Shadow Hawk'' built for ComStar in 3066. The 'Mech carries an [[UAC/5]], an [[LRM-15]] launcher mated to an [[Artemis IV]] fire control system, and two [[ER medium laser]]s, all linked to an [[improved C3]] computer. Protection is provided by 10.5 tons of armor built on an [[endo steel]] chassis and powered by an [[extralight engine]]. As with other Project Phoenix 'Mechs, shortly after its introduction reports started coming in of Word of Blake units operating in the [[Chaos March]] equipped with 7CS ''Shadow Hawks''.<ref name=TROPP/> BV (1.0) = 1,370; BV (2.0) = 1,496<ref>''Record Sheets: 3085 Unabridged — Project Phoenix'', p. 79</ref> *; SHD-7H : This variant is based on the SHD-5M and keeps the ground speed and jump capability of that model. The weaponry includes an [[ER medium laser]] on the right arm, an [[LB 10-X AC]] is mounted on the left torso, and an [[enhanced LRM-5]] in the right torso; the head-mounted [[SRM-2]] remains in place. One ton of ammunition for the SRM and enhanced LRM, and two tons for the LB 10-X are carried in the right torso in a [[CASE II]] protected bay. To free weight for this equipment the 'Mech uses an [[endo steel]] skeleton and a [[light engine]]. BV (2.0) = 1,394<ref>''Recognition Guide: ilClan, vol. 12'', p. 31</ref> *; SHD-7M : The 7M ''Shadow Hawk'' is Earthwerks' version of the Project Phoenix ''Shadow Hawk'' introduced in 3066, using some of the newest technologies available in the Free Worlds League. Based on the -5M, the 'Mech is built using an [[endo steel]] chassis with ten and a half tons of [[standard armor]], with [[CASE]] for ammunition protection. While carrying many of the same weapons, it downsizes the [[LRM-20]] rack to an [[LRM-15]] and uses a [[light Gauss rifle]] in place of the [[UAC/5]] for long-range sniping. This variant was later acquired by the Capellan Confederation, not only to supply their own forces but for their [[Trinity Alliance]] allies.<ref name=TROPP/> BV (1.0) = 1,351; BV (2.0) = 1,447<ref>''Record Sheets: 3085 Unabridged — Project Phoenix'', p. 80</ref> *; SHD-8L : This [[3079]] variant uses a [[medium VSP]], an [[MML-5]], and a [[plasma rifle]]. [[Improved jump jet]]s provide a jump range of 210 meters, powered by a [[275 XL|275-rated]] [[XL engine]]. For electronic warfare support this version uses a [[Guardian ECM suite]] and a [[Beagle active probe]].<ref name=TRJp122f /> BV (2.0) = 1,536<ref>''Record Sheets: 3085 Unabridged — Project Phoenix'', p. 81</ref> *; SHD-9D : The ''Shadow Hawk'' 9D was released in [[3070]] and carries as its primary weapons a new [[light AC/5]] and a pair of [[MML-5]] launchers. The MML launchers can fire both LRM and SRM ammunition, giving the 'Mech a great deal of tactical flexibility. For close-range defense, the 'Mech has a highly accurate [[medium pulse laser]] which, along with the autocannon, is linked to a [[targeting computer]] for increased accuracy. The 9D also has a [[C3 slave]] unit, allowing it to share targeting data with friendly units which are linked to the 'Mech in a [[C3 network]].<ref name=TRJp122f /> The pilot is protected by [[light ferro-fibrous]] armor and a [[Full-Head Ejection System]]. BV (2.0) = 1,313<ref>''Record Sheets: 3085 Unabridged — Project Phoenix'', p. 82</ref> *; SHD-11CS : This variant, introduced in [[3068]], saves weight with a [[275 light engine|275-rated]] [[light engine]], [[endo steel]] chassis, and [[light ferro-fibrous]] armor to mount a [[snub-nose PPC]], an [[LRM-15]] guided by an [[Artemis IV FCS]], and a pair of [[ER medium laser]]s. The accuracy of these weapons is aided by the inclusion of an [[improved C3 computer]].<ref name=TRJp122f /> Like the other "Phoenix" variants, it is equipped with a [[Full-Head Ejection System]].<ref name=TRJp122f /> BV (2.0) = 1,700<ref>''Record Sheets: 3085 Unabridged — Project Phoenix'', p. 83</ref> *; SHD-12C : Built for the Rasalhagian forces of the [[Ghost Bear Dominion]] in 3079, this variant uses a [[Lord's Light 3 Heavy PPC|Lord's Light 3]] [[heavy PPC]] as its main weapon, supported by a [[Diverse Optics Extended-Range Medium Laser|Diverse Optics]] [[ER medium laser]] and a [[Helga Series 7-Tube Multi-Missile Launcher|Helga Series]] [[MML-7]]; 12 double heat sinks handle most of the burden. [[Wall Type 8 Light Ferro-Fibrous|Wall Type 8]] [[light ferro-fibrous]] armor protects the pilot, but in the event of a catastrophic failure the pilot can use a [[Full-Head Ejection System]] to escape. Its [[Rawlings 55]] jump jets provide a limited jump capability of 120 meters, but it makes use of a larger 330-rated engine to reach speeds over 90 km/h. To make room for all this equipment, the Bears used an Inner Sphere-grade [[GM 330 XL]] and [[Kallon Type VII Endo Steel]] chassis. The electronics are updated to [[Dash 2 Standard]] comms and a [[Blade 12]] T&T system.<ref name=TRJp122f /> BV (2.0) = 1,574<ref name=TRJp122f /> *; ''Shadow Hawk'' C : A [[Clan]]-tech retrofit of the classic ''Shadow Hawk'' and intended for second-line and ''[[solahma]]'' troops, the ''Shadow Hawk'' C replaces all Inner Sphere–tech weaponry with Clan equivalents. The C mounts an [[LB 5-X AC]], an [[LRM-5]] equipped with [[Swarm LRM]] munitions, a [[Streak SRM-2]], and an [[ER medium laser]]. Two additional [[jump jet]]s were added, extending the jump radius to 150 meters, as well as one additional [[single heat sink]]. BV (2.0) = 1,309<ref>''Recognition Guide: ilClan, vol. 12'', p. 32</ref> ===Custom Variants=== *; SHD-2H Sandy : Used by Alexander "Sandy" Romanov, a known associate of the [[Bounty Hunter]], this ''Shadow Hawk'' is equipped with [[double heat sink]]s, a jump range of 150 meters, and a [[Target Acquisition Gear|TAG]] unit. The weapons have been removed and replaced with a [[heavy PPC]] and [[light PPC]]. BV (2.0) = 1,517<ref>''BattleTech Dossiers: The Bounty Hunter'', p. 25</ref> ===Apocryphal Variants=== {{ApocryphalContentStart}} These variants were introduced in various apocryphal sources, and thus far have not appeared in any canonical media. ''From [[MechWarrior 5: Mercenaries#Call to Arms|''MechWarrior 5: Call to Arms'' Expansion Pack]]:'' *; SHD-1P : Introduced in [[3024]], this variant of the ''Shadow Hawk'' drops the SHD-2H's [[SRM-2]] rack to free up the weight for a [[Claw|medium claw]] fitted in the SHD-1P's left arm.<ref name=MW5CtA>''MechWarrior 5: Mercenaries, Call to Arms''</ref> ''From [[MechWarrior 5: Mercenaries#Heroes of the Inner Sphere|''MechWarrior 5: Heroes of the Inner Sphere'' Expansion Pack]]:'' *; SHD-2P : Introduced in [[2846]], this variant of the ''Shadow Hawk'' replaces its [[AC/5]] with a [[medium rifle]], supplied by two tons of ammunition. Further changes include an additional ton of ammunition for the [[LRM-5]] launcher, the removal of two [[single heat sink]]s and the installation of a [[supercharger]].<ref name=MW5HoIS>''MechWarrior 5: Mercenaries, Heroes of the Inner Sphere''</ref> ''From [[MechWarrior Online]]:'' *; SHD-GD ''The Gray Death'' : Themed as a variant piloted by Grayson Death Carlyle, despite the fact that neither Grayson nor second ''Shadow Hawk'' pilot [[Sharyl (Gray Death Legion)|Sharyl]] piloted such a variant, ''the Gray Death'' swaps the [[AC/5]] for an [[AC/10]] with two tons of ammunition, and carries two [[medium laser]]s in each arm. The [[LRM-5]] and [[SRM-2]] are kept, along with the three [[jump jet]]s, and cooling is handled by 12 [[double heat sink]]s. The tonnage required for the heavier weapons loadout is freed up by using a 275-rated [[XL engine]]. The 'Mech has a grey, black and red pattern with white insignia of the Gray Death Legion and is presumably the second ''Shadow Hawk'' the unit operated, piloted by Sharyl.[http://mwomercs.com/forums/topic/178507-patch-notes-13350-18-nov-2014/] *; SHD-S(LGD) ''The Scattershot'' : The ''Shadow Hawk'' [[Legendary 'Mech]] mounts a trio of [[LB 2-X AC]]s in it's right torso supported by a pair of [[MRM-10]] racks in the left torso. Built around an 255-rated XL engine, double heat sinks, endo steel frame and clad in light ferro-fibrous armor, the ''Scattershot'' carries a total of three tons of LBX rounds and three tons of MRM reloads.[https://mwomercs.com/news/2023/04/2739-patch-notes-142760-18april2023] {{ApocryphalContentEnd}} == Design Quirks == The ''Shadow Hawk'' is subject to the following [[Design Quirks]]:<ref name=BMM94>''BattleMech Manual'', Fourth Printing, p. 94: "BattleMech Quirk Table"</ref><ref>[https://bg.battletech.com/wp-content/uploads/2022/09/BattleMech-Manual-2022-09-14-v6.01.pdf ''BattleMech Manual Errata (Version 6.01)'', p. 9: "BattleMech Quirk Table"]</ref> * [[Battlefists]] * [[Improved Life Support]] * [[Rugged| Rugged (1)]] <!-- added by errata --> * [[Ubiquitous]] ==Related BattleMechs== * '''''[[Shadow Hawk IIC]]''''' - The [[SLDF]] took several ''Shadow Hawk''s with them on their Exodus. The [[Clans]] eventually upgraded several of the old SHD-2H 'Mechs with Clan technology, creating the ''Shadow Hawk'' C and, later, completely redesigned the original model to make the ''[[Shadow Hawk IIC]]''. BV (1.0) = 1,646; BV (2.0) = 1,732 ==Notable Pilots== :''See [[:Category:Notable Shadow Hawk Pilots]]'' ==Notes== * Author [[Blaine Lee Pardoe]] stated in a [https://web.archive.org/web/20221102192457/https://blainepardoe.wordpress.com/2018/08/16/out-of-the-archives-the-battlemechs-i-wrote-about-or-designed/ blog entry] that, according to his memory which he admitted could be wrong, the ''Shadow Hawk'' was among the BattleMechs for which he wrote the original background as initially published in ''TRO:3025'', after being given only its name, image, and game stats to work with for the TRO entry. * The original ''Shadow Hawk'' is based on the title Combat Armor of the anime ''Fang of the Sun Dougram''. Due to legal difficulties it became one of the [[Unseen]]. * The ''Shadow Hawk'' C was updated in ''RG:ilClan v12'' from the previous version in ''[[The Battle for Twycross]]'', p. 48, and ''[[Record Sheets: 3085 Unabridged — Project Phoenix]]'', p. 85, increasing the number of jump jets and heat sinks while, consequently, the BV 2.0 (previously 1,260). * [[Shrapnel_(magazine)#Issue_14|''Shrapnel'', issue 14]] published a Technical Readout for the SHD-3H. This variant is based on the BattleDroids stats attached to the back of [[TCI_Model_Sets#History|anime model kits]] imported by [[Twentieth Century Imports]]. * In German products, the unit's proper name was translated to '''''Dunkelfalke'''''. The model code was changed accordingly to '''DKF-2L'''. * In French products, the unit's proper name was translated as '''''Faucon Ombre'''''. ==Gallery== <gallery> 3025_shadowhawk.jpg|Original [[Unseen]] SHD-2H ''Shadow Hawk'' from ''[[Technical Readout: 3025|TRO:3025]]'' Shadow_Hawk_SHD-2H_FSW.jpg|SHD-2H ''Shadow Hawk'' from ''[[First Succession War (sourcebook)|First Succession War]]'' SHD-Shadowhawk.png|SHD-5M ''Shadow Hawk'' from ''[[Technical Readout: 3050|TRO:3050]]'' Shd-12c shadow hawk.png|SHD-12C ''Shadow Hawk'' from ''[[Technical Readout: 3085|TRO:3085]]'' Shd-5d shadow hawk.jpg|SHD-5D ''Shadow Hawk'' from ''[[Technical Readout: Project Phoenix|TRO:Phoenix]]'' Shd-7cs shadow hawk.png|SHD-7CS ''Shadow Hawk'' from ''TRO:Phoenix'' Shd-7m shadow hawk.png|SHD-7M ''Shadow Hawk'' from ''TRO:Phoenix'' SHD-1R Shadow Hawk.jpg|SHD-1R ''Shadow Hawk'' from ''[[Experimental Technical Readout: Primitives, Volume 1|XTRO:Primitives I]]'' Camokuritanightstalkers1.png|''Shadow Hawk'' in colors of [[Night Stalkers]] from ''[[Camo Specs]]'' Shadow Hawk (Tyche) BTLegends.jpg|[[Isobel Carlyle|Isobel Carlyle's]] ''Shadow Hawk'' ''Tyche'' from ''[[BattleTech: Legends|BT:Legends]]'' Image:MWO Shadowhawk.png|Model of ''Shadow Hawk'' from ''[[MechWarrior Online|MWO]]'' Battledroids-Shadow Hawk.jpg|''Shadow Hawk'' standee from ''[[Battledroids]]'' BattleTech2e-Shadow Hawk.jpg|''Shadow Hawk'' standee from ''[[BattleTech, Second Edition]]'' Mechs-Shadow Hawk.jpg|''Shadow Hawk'' miniature from ''[[...Mechs!]]'' (also used in ''[[BattleTech, Third Edition]]'') A Game of Armored Combat - Shadow Hawk.jpg|''Shadow Hawk'' miniature from ''[[BattleTech: A Game of Armored Combat]]'' Gray Death Legion Heavy Battle Lance Shadow Hawk.jpg|''Shadow Hawk'' miniature from ''[[Gray Death Legion Heavy Battle Lance]]'' </gallery> ==References== <references/> ==Bibliography== {{div col|colwidth=25em}} * ''[[The Battle for Twycross]]'' * ''[[BattleMech Manual]]'' * ''[[BattleTech: Battle of Tukayyid]]'' * ''[[BattleTech Dossiers: The Bounty Hunter]]'' * [[BattleTechnology#Issue 21|''BattleTechnology'', Issue #21]] * ''[[Decision at Thunder Rift]]'' (novel) * ''[[Experimental Technical Readout: Primitives, Volume 1]]'' * ''[[First Succession War (sourcebook)|First Succession War]]'' * ''[[Master Unit List]]'' * ''[[Mercenary's_Star_(novel)|Mercenary's Star]]'' * ''[[The Price of Glory]]'' * ''[[Recognition Guide: ilClan, vol. 12]]'' * ''[[Record Sheets: 3039 Unabridged]]'' * ''[[Record Sheets: 3050]]'' * ''[[Record Sheets: 3067]]'' * ''[[Record Sheets: 3085 Unabridged — Project Phoenix]]'' * ''[[Record Sheets: Phoenix Upgrades]]'' * ''[[Technical Readout: 3025]]'' * ''[[Technical Readout: 3039]]'' * ''[[Technical Readout: 3050]]'' * ''[[Technical Readout: 3055]]'' * ''[[Technical Readout: 3085]]'' * ''[[Technical Readout: Project Phoenix]]'' * ''[[Total Warfare Style Record Sheets: Phoenix Upgrades]]'' * ''[[Wolves on the Border]]'' (novel) {{div col end}} [[Category:'Mechs]] [[Category:ComStar BattleMechs]] [[Category:Federated Suns BattleMechs]] [[Category:Free Worlds League BattleMechs]] [[Category:Star League BattleMechs]] [[Category:Terran Hegemony BattleMechs]] [[Category:Improved C3 Equipped BattleMechs]] [[Category:German renamed units]] [[Category:Magistracy of Canopus BattleMechs]] [[Category:SLDF Royal BattleMechs]]

Summary:

Please note that all contributions to BattleTechWiki are considered to be released under the GNU FDL 1.2 (see BattleTechWiki:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

To edit this page, please answer the question that appears below (more info):

A MechWarrior drives a __________ (full name)

Cancel Editing help (opens in new window)

Advanced templates:

Editing: {{Merge}}   {{Moratorium}}   {{Otheruses| | | }}

Notices: {{NoEdit}}   {{Sign}}   {{Unsigned|name}}   {{Welcome}}

Administration: {{Essay}}   {{Policy}}   {{Procedure}}

Templates used on this page:

• Template:Ambox (edit)
• Template:ApocryphalContentEnd (edit)
• Template:ApocryphalContentStart (edit)
• Template:Div col (edit)
• Template:Div col end (edit)
• Template:Div col/styles.css (edit)
• Template:InfoBoxBattleMech (edit)
• Template:Main other (edit)
• Template:Sp (edit)
• Template:Update Needed (edit)
• Template:Update needed (edit)
• Module:Arguments (edit)
• Module:Category handler (edit)
• Module:Category handler/blacklist (edit)
• Module:Category handler/config (edit)
• Module:Category handler/data (edit)
• Module:Category handler/shared (edit)
• Module:Check for unknown parameters (edit)
• Module:Message box (view source) (protected)
• Module:Message box/configuration (edit)
• Module:Namespace detect/config (edit)
• Module:Namespace detect/data (edit)
• Module:No globals (edit)
• Module:Yesno (edit)

This page is a member of 1 hidden category:

• Category:Articles needing updates